The Importance of Sealcoating Your Asphalt

The Importance of Sealcoating Your Asphalt

The Importance of Sealcoating Your Asphalt

Your asphalt surfaces should be maintained with a very important job on a routine basis: sealcoating. By sealcoating your asphalt, you provide a protective layer that keeps your asphalt in optimal condition over time. As experts in crushed asphalt in Park Falls WI, we understand the importance of sealcoating your asphalt. Depending on the traffic flow and usage of your asphalt, you may need sealcoating each year. These are a few things you should understand about sealcoating your asphalt roads, driveways, and parking lots.

Sealcoating is the best way to protect your asphalt.

Sealcoating is one of the best ways to protect your asphalt surfaces. By performing this maintenance task on a routine basis, you can provide your asphalt with a protective layer that keeps weather exposure, water, and heavy traffic from seeping into the sublayers of the asphalt. Once this occurs, you may notice potholes or cracks in the pavement. Routine sealcoating will prevent these issues from ever developing, which can also promote a longer lifespan for your asphalt.

You need to prepare for sealcoating.

There are certain conditions that need to be met before sealcoating is done. Without proper preparation, the coating may not adhere properly with can decrease its protection over your asphalt. Talk with your paving contractors to discuss the proper weather conditions and optimal temperatures for the job. Consider the time of day where your parking lots or roadways have the least traffic so that you cause the less disruption to your daily operations.

You will need to keep traffic off the surface while sealcoating.

When you need sealcoating for a large surface, like a parking lot or roadway that carries a lot of traffic, you need to manage the project. This involves putting up barriers to guide traffic away from the project and protect the surface from any auto or foot traffic until the surface is dried. Be sure that you discuss these variables with your paving contractor so you have full understanding they take care of these roles or if you need to arrange a staff member to do it.

Sealcoating dries quickly.

Sealcoating layers take time to dry before you can walk or drive on these surfaces. If it does not properly cure, it will weaken and may leave the asphalt unprotected. Once the job is completed, you should be able to use the surface within a few hours safely. Other than waiting for the layer to dry, you will not need to deal with any other maintenance tasks, as the contractors will take care of this.

By performing routine maintenance like sealcoating, you can keep your asphalt looking great and lasting long. If you are looking for experts in crushed asphalt in Park Falls WI, trust The Seal Guys with all your asphalt paving, repair, and sealcoating needs. Contact us for your free estimate today!

Save Money. Extend the life of your pavement.


Contact Us

927 S 5th Ave, Park Falls, Wisconsin 54552

(715) 518-8802

To Top